What is the impedance of the headphones?

What is the impedance of the headphones?

Frequency Range


The full name of the frequency response range is

Frequency Response Range

Also called frequency characteristic. The frequency response is defined as the range of allowable amplitudes

sound system

The range of frequencies that can be played back and how much the signal changes within that range is called the frequency response. The range that human hearing can reach is about 20Hz-20KHz, noise cancelling earbuds and earphones,and the current mature earphone technology has reached this requirement. The ratio of the maximum value to the minimum value of the output voltage amplitude in a given frequency range, expressed in dB as the ratio of no


. The frequency response of ordinary power amplifiers is about (+/-) l-3dB from 20Hz-20000Hz; the frequency response of high-quality power amplifiers is about +/-0.1dB from 20Hz-20kHz.

Sensitivity, also known as sound pressure level. In layman's terms, the sensitivity of the headphones is also reflected in


required input power.

Headphone Sensitivity

The higher the input power and the lower the input power, the louder the sound output from a sound source of the same power. For portable devices such as Walkman, sensitivity is a very important indicator. Generally speaking, the sensitivity of Walkman headphones is higher than

Monitor Grade Headphones

High, around 110db, so for the Walkman, the larger the value, the better.

Headphone impedance

Yes AC impedance

The lower the impedance, the easier the headset is to talk and drive. On desktop computers or power amplifiers, VCDs, DVD TVs and other machines with headphone jack output, it is generally more appropriate to use medium and high impedance headphones. If you use low-impedance headphones, be sure to turn down the volume first, then plug in the headphones, and then turn up the volume little by little to prevent the headphones from being burnt out by overloading the headphones or deforming the voice coil and causing the sound to break. Low-impedance headphones are generally easy to push, so portable, power-saving machines such as Walkmans and Mp3 machines should choose low-impedance headphones. At the same time, we should also pay attention to high sensitivity, which is more important for Walkman and Mp3. Of course, when headphones with higher impedance are paired with audio sources with high output power

sound effect better.

Related Hot Topic

Can you make phone calls while wearing noise-canceling headphones?

While any headphones can be used to make calls, for the best results we advise choosing models with great active noise cancellation (ANC), crystal-clear sound quality, and an easy-to-switch transparency mode.

  • TAGS