9 Flexible professional pcb manufacturing in 2024

Magnetic Field Antenna PCB 6 Pieces Near Field Probe Locate & Identify Radiation Source Interference Magnetic SMA A storage box and a female interface

Price: $15.72

**PCB MATERIAL MADE**There are six magnetic field antennas in the package.

Improves service life and has long durability because it is made of premium PCB material.

Helps locate and identify possible sources of interference within the electronic component building blocks.

When low noise preamplifiers are used in conjunction with frequency, phase noise, and spectrum components, they can be measured collectively.

The item type that is being discussed is the Magnetic Field Antenna.

Its stable performance and dependability come from accurate manufacturing.

【UPGRADED PROBE KIT】– With a wider bandwidth and an ergonomic design, this probe kit is an improved and updated version that has been optimized based on the previous generation products.

2PCS 3D Printer LED Light Strip PCB Colorful Beads 3D Printer LED Light Bar DC5V 270mm/10.63in 3D Printer Accessories Colored LED Light Source 3D Printer Lamp Suitable for VORON 2.4

Price: $20.20

IDEAL REPLACEMENT: Wonderful replacement for the old and damaged parts, fine workmanship, attention to details, helps you improve the working performance!

PCB BOARD: For PCB Led, XH2.54 3P terminal prefabrication, LED has been welded, PCB board is fully connected, can be used directly, durable and reliable, please rest assured to purchase.

SCOPE OF APPLICATION: DC5V voltage XH2.54 3P terminal is suitable for various models of 3D printers, such as for VORON 2.4, for Trident, etc.

, and can also be used for other DIY projects.

COLORFUL BEADS: WS2812B bright colored beads, cool lighting, open source designed lamp sequence, and more exciting use process.

MULTIPLE WORKING MODES: By adding macro commands, you can control this light bar strip according to your imagination, with infinite creativity and possibilities.

Let's explore the new fun of 3D printing together.

3D Printer Parts Soldered Hartk SB Toolhead Board Afterburner 2 Part PCB Kit Compatible with Voron 2.4 Trident Switchwire CW2 Extruder and Stealthburner 3D Printer

Price: $15.87

This board kit is designed and open sourced by Mr.

Hartk, Thanks here.

More information, please check this forume: https://github.

com/hartk1213/MISC/tree/main/PCBs/Stealthburner_Toolhead_PCB This version of SB toolhead is the latest compatible with Stealthburner and CW2 extruder to keep all the cables clean and more convenient for maintenance.

The board is Soldered and ready to use, we also provide some pins and connectors for customer to connect their wires It supports the new RGBW LEDs and the ERCF filament sensor, which both are not included here.

Package: 2pcs PCB board, some terminals and pins

Round Spacer Kit White, Round Hollow ABS Straight Through Isolation Post Set, LUORNG 100 Pieces, 6.2 mm ID x 11 mm OD Ideal for Electronic Products, Micro Motors, and Automotive Manufacturing Parts

Price: $8.99

Premium materials: The insulating ABS plastic used to make this nylon round gasket holder has excellent resistance to temperature changes, oil, corrosion, and tearing.

It is also long-lasting and has a long service life.

Strong: These rust-resistant, lightweight, stable, and insulating plastic spacers are powerful.

Brackets are frequently employed to place circuit boards, panels, doors, or gears in the realm of electrical components and hardware.

These components are appropriate for the application because of things like carbon fiber utilization, PCB isolation or tightness, etc.

Wide range of applications: These round shims can be used in micromotors, electronic devices, toys, stationery, automation equipment, auto parts, instruments, and machinery.

In circuit boards and other applications, they are frequently utilized to safeguard LEDs.

Easy to reach and convenient packaging: Each shim is kept in a transparent plastic box.

The shims are easily removable, carryable, and storable when arranged into portions.

In this manner, you can easily locate the size you need fast and maintain a neat work environment at all times.

Included in the package: One hundred pieces of ten standard sizes of nylon round spacer holders make up this selection kit.

Ten spacers each measuring 11 mm in outer diameter, 6.2 mm in inner diameter, and 3 mm, 4 mm, 5 mm, 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm, and 25 mm in length are included.

Perfect with M5 and M6 screws.

572 pieces of EEEEE (M2 M2.5 M3 M4) standoff screws, motherboard circuit board standoff assortment Man and Female Nuts Brass hexagon spacers and standoffs assortment of PCB standoffs Spacer Hex

Price: $23.00

Screws and nuts are included with 572 pieces of m2.5, m3, and m4 standoffs.

M2: 160 pieces M2.5: 156 pieces?

M3: 160 pieces M4: 96-piece set of male and female hex standoffs?

How long is it in 6 mm, 10 mm, 15 mm, 20 mm?

With nuts and screws Separate Compartment For Simple Storage And Access.

Door Specific to Every Kind of Component

Replacement Part Transfer for XHSESA 3D Printer Compatible with Artileri Sidewinder X1 Accessories, the Extruder Board Controller

Is this host PCB adapter board cable kit compatible with the Sidewinder X1 3D printer and Artillery Genius? Prototype PCB Fabrication

a 20-pin ribbon connector cable is included.

Material: FPC, which is adaptable, steady, and long-lasting.

Easy to use, plug and play, stable performance and extended service life 3M adhesive is on the back of the cable to make installation simple.

One PCB adapter board and one cable are included in the package.

With MGN9H Carriage, MGN9 Rail, and Screws, the OptTap V1 PCB Tap Kit with 5V High Precision Optical Leveling Sensor is compatible with the Voron V2.4 and Trident 3D Printer.

Price: $28.99

For the V2 and Trident printer designs, Tap is a nozzle-based z-probe.

To activate an optical switch, the entire toolhead moves.

Tap provides a lot of benefits:Ultra-precision 0.4μm (0.0004mm), adaptability to any build surface, and durability through optical sensor (millions of probe cycles) excellent temperature stability (70°C to 100°C); reduced dock/undock macros and simplified probe mechanics; Z-endstop not needed separately, and crash protection For further information regarding the printed parts download and more, see this forum at https://github.

com.

Package: 1 set Tap complete kit, same to what is seen in the first picture.

The Anet A8 Plus mainboard module with three-way output and 12–24 volt USB interface is equipped with a PWM 3D printer interface.

MAIN FUNCTION: The highly integrated motherboard may replace the for Ramps1.4 directly, resolving the issue that the combination interface is difficult to use and prone to failure.

GOOD STABILITY: You can debug the board yourself and the automated leveling of the proximity probe is supported by the well-optimized wiring arrangement and heat dissipation design.

ANET A8 PLUS 3D printers are compatible with this motherboard, which may be directly linked to Ramps1.4, 2004LCD, and 12864LCD control boards (without the need for an included L type adaptor board).

SUITABLE FOR 12-24 V power input: This driver uses a high-performance, low-resistance MOS tube that provides good heat dissipation and successfully addresses the hot bed MOS tube's heating issue.

DRIVER BOARD: Equipped with a USB interface that makes connection easy and operation steady, the motherboard is powered by an integrated 4-way A4988 16 subdivision stepper driver board motor.

817 3.6-30V PCB 8 Channel Driver Photoelectric Isolated Module for Relays, Optocoupler Isolation Board, Optical Isolator Module

【PCB】The optocoupler isolation board is made from premium PCB material, which possesses miniaturization and dependability, making maintenance and replacement simple.

By using jumper caps, the optical isolator module may achieve both pull-down and high-level outputs.

【INDEPENDENT CONTROL】The photoelectric isolated module board has four 817 independent channels that enable the simultaneous control of various voltages.

【CONTROLLED TERMINAL】 With the voltage converter adapter module, you can achieve a 3.3V or 5V control interface.

When you turn on the control terminal, the controlled terminal turns on simultaneously.

【APPLICABLE】 With its powerful anti-interference ability, the optocoupler optoisolator can drive high power transistors, MOS tubes, and other devices that need high voltage drive.

It can also drive low power 24V relay work directly.

5 trendiest Plated Through Hole vs Vias in 2024

10 bang-for-your-buck Multilayer PCB vs Single Layer PCB in 2024